beautypg.com

Prepare and install lockset hardware, Insulate, Finishing – JELD-WEN AuraLast Exterior Door Frame User Manual

Page 7

background image

INSTALLATION INSTRUCTIONS

AuraLast

®

Exterior Door Frame Assembly Instructions

7

Please visit www.jeld-wen.com/resources for warranty and

care and maintenance information.

Thank you for choosing

© 2009, JELD-WEN, inc. | JELD-WEN and Reliability for Real Life are trademarks or registered trademarks of JELD-WEN, inc., Oregon, USA.
All other trademarks are the property of their respective owners.

Prepare and Install Lockset Hardware

There are many types and varieties of lockset hardware
available. Prepare the strike jamb for the chosen lockset.
Drill pilot holes and secure strike plate with two #8 x 2-1/2"
screws through strike jamb, shims, and into rough stud.
Adjust strike in or out for proper door operation.

Insulate

Insulate around edges of the door frame with loosely packed
fiberglass insulation or low expansion foam.

Finishing

For a Natural Wood Finish - apply stain with an exterior grade
clear coat sealant.
- or -
For a Painted Finish - apply an exterior grade latex paint.

For Exterior Trim:
Purchase our AuraLast Brickmould Kit.

#8 x 2-1/2"
Screws

Shims

16-144 04/09