JELD-WEN PDS013 Custom Sliding Patio Doors - Manual

This document explains how to properly assemble a knock down (unassembled) patio door frame. Follow the installation instructions that
came with the product and this supplment to properly install the patio door.
SAFETY
• Read and fully understand ALL manufacturers’ instructions before beginning.
• Patio doors can be very heavy and awkward. Do not work alone. Two or more people are required. Use safe lifting techniques.
For questions, call us at (800) JELD-WEN / (800) 535-3936.
NEEDED TooLs & MATERiALs
• High quality silicone sealant
• Phillips screwdriver
s U P P L E M E N TA L A s s E M b Ly i N s T R U c T i o N s
Do-It-Yourself Technician
cUsToM sLiDiNg PATio DooRs
The advice offered herein should be reviewed and performed by a trained service provider. It is recommended that you consult with a competent and licensed
construction contractor or building professional prior to taking any action. JELD-WEN disclaims any and all liability associated with the use and/or provision of these
instructions. Any reliance upon the information or advice is at the risk of the party so relying. The information contained herein may be changed from time to time
without notification.
© 2010 JELD-WEN, inc. JELD-WEN, the JW icon and Reliability for real life are registered trademarks of JELD-WEN inc., Oregon USA
All other trademarks are the property of their respective owners.
Sill
Rubber Bumper at
Head Jamb
Side Jamb
Rubber Bumper at Sill
Track
Head Jamb
Exterior Side Filler/
Exterior Head Filler
Clad Extrusion Gasket
Upper Panel Track (sits
on top of operating
panel)
Rectangular Gasket
Interior Stationary Side
Filler
Corner Keys
Interior Head Stop
PAckAgE coNTENTs
(02/10)
FRAME AssEMbLy
(1) Sill
(2) Side jambs
(1) Head jamb
(2) Corner keys
(2) Clad extrusion gaskets
(2) Rectangular gasket
PANEL iNsTALLATioN
(1) Operating panel
(1) Stationary panel
(1) Upper panel track
(1) Interior stationary side filler
(2) Exterior fillers
(1) Interior head stop
(1) Pile weatherstrip pad
(1) Rubber bumper
(1) Handle set
scREWs
(21) #8 x 3/4" screws for frame assembly
(1) #8 x 3/4" screw - to secure fixed panel clip
(15) #7 x 3/4" screws - to secure exterior fillers
(4) #7 x 3/4" screws - to secure stat. panel at sill
(8) #7 x 3/4" screws - to secure upper panel track
(10) 1 1/4" nails - to secure interior stat. side filler
(1) #6 x 1 1/2" screws - to secure rubber bumper