JELD-WEN SVC001 Builders Vinyl Sliding Patio Door Handing Reversal - Manual

SERVICE SUPPLEMENT
Builders Vinyl Sliding Patio Door Handing Reversal (SVC001)
The advice offered herein can be done by a homeowner with some mechanical aptitude. If you are unsure, it is recommended that you hire a trained service provider such as a
competent and licensed construction contractor or building professional. JELD-WEN disclaims any and all liability associated with the use and/or provision of these instructions.
Any reliance upon the information or advice is at the risk of the party so relying. The information contained herein may be changed from time to time without notification.
© 2011 JELD-WEN, inc. | JELD-WEN, Reliability for real life and the JW icon are trademarks or registered trademarks of JELD-WEN, inc., Oregon USA.
All other trademarks are the property of their respective owners.
CONTACT US
For questions, feel free to contact us by phone or email:
• Phone: 1-(800)-JELD-WEN/1-(800)-535-3936
• Email: [email protected]
PRECAUTIONS ANd SAfETy
Follow all manufacturers’ instructions and labels. •
Use proper and safe equipment and precautions if servicing the •
exterior side of patio doors above ground level.
Insect screens are not security devices and will not prevent children,
•
other people, or pets from falling through.
Use extra care when driving screws near glass unit to avoid breakage.
•
Use caution when tightening screws to avoid stripping the screw •
holes.
Handling patio door parts can be awkward and heavy and could
•
cause physical injury or product damage; we recommend the help of a
second person.
NEEdEd TOOLS ANd MATERIALS
Do-It-Yourself Technician
(08/11)
These instructions are applicable to pre-installed 6'8" and 6'10"
Builders sliding patio doors with weep holes on the top and
bottom. Only these doors are reversible, or specially designed to
be converted to be opened either from the left or the right. Patio
doors that are set up for left hand operation (door opens from
the left on the exterior) or vice versa, can be converted to open
from the opposite side with these instructions. Do not install the
patio door until after completion of these instructions and the
fixed panel is on the desired side.
Pliers •
Rubber mallet •
Putty knife •
Pencil •
Flat head screwdriver •
Phillips head screwdriver •
Power drill with 3/32" drill bit for pilot •
holes only
PREPARE PATIO dOOR
• Move patio door to installation location.
• Remove all wrapping material, shipping blocks and handles.
REMOVE SCREEN
1. Using a phillips
screwdriver, turn
(do not remove)
adjustment screws
counterclockwise
to retract rollers in
each corner.
2. Lift screen up and
over bottom screen
track (if needed,
insert a large putty
knife between the
track and the rollers
to help lift over the
track).