Column electrical, Ignition electrical – ididit Retrofit Steering Column: 1973 Chrysler B-Body User Manual

Page 8

Column Electrical:

OK, this is easy… the bag with the Dress

up Kit also contained a black wiring plug

adaptor. This should simply plug into the

column on the wide plug and then into the

OEM plug from under the dash. (Figure 15)

Ignition Electrical:

Please see pack “B” for wiring instructions.

Note: There are up to 3 wires

on the ignition plug that may

not have a mate. These wires

were for key buzzer and shift

indicator. The wiring of the

ididit column does not support

these features. The wires

are insulated and should be

protected in the connector.

(Figure 16)

Securing your wires:

Now with all of the electrical connections attached the Relay pack

needs to be secured up and out of the way of the pedals. Be

especially careful of the Throttle Cable. When prototyping this

column we secured the wires between the column dash mount and

the fuse panel up and out of the way from everything.

Note: We provided mounting tabs on the Relays. These mounting

tabs are not necessary, but they are handy if you can use them.

Reconnect the battery terminals to the battery.

(Figure 15)

(Figure 16)