ididit Retrofit Steering Column: 1967-72 Ford Truck - Manual (Page 2)

A.) 1. Column
B.) 1. Ford Wire Plug
C.) 1. Instructions & Dress Up Kit (2 knobs & levers)
(Dress Up Kit installed on this column)
INDEX
REMOVAL.............................................................................2
WIRING INSTALLATION....................................................3
NEW COLUMN INSTALLATION......................................3
INSTALLATION OF KNOBS & LEVERS..........................4
OEM STEERING WHEEL INSTRUCTIONS....................5
FINAL CHECK......................................................................5
These are the components that come with the column.
(Paintable Steel Column pictured)
We will work through this installation using all these parts. For
instruction purposes we will assume your truck is all original and has
a factory manual steering gear box and an OEM harness.
A.
B.
Installation will require a 3/4” DD x 3/4” 36 Rag Joint.
The original joint cannot be used.
C.