Equus 3130 - Scan Tool – OBD2 - Manual (Page 11)

About the Scan Tool
ADJUSTMENTS AND SETTINGS
OBD2 9
E
■ The Brightness field shows the cur-
rent brightness setting, from 0 to 43.
2. Press the UP button to decrease
the brightness of the display (make the
display darker).
3. Press the DOWN button to increase
the brightness of the display (make the
display lighter).
4. When the desired brightness is obtained, press the ENTER/LD
button to save your changes and return to the MENU.
Using the Backlight
1. Use the UP and DOWN but-
tons, as necessary, to highlight Display
Backlight in the MENU, then press the
ENTER/LD
button.
■ The Display Backlight screen displays.
2. Press the UP or DOWN button,
as necessary, to select the desired
backlight mode, either ON or OFF.
3. When the desired backlight mode is
selected, press the ENTER/LD
button to save your changes.
■ The display returns to the MENU, and
the backlight turns “on” or “off” as
selected.
Selecting the Display Language
1. Use the UP and DOWN but-
tons, as necessary, to highlight Select
Language in the MENU, then press the
ENTER/LD
button.
■ The Select Language screen dis-
plays.
■ The currently selected display
Language is highlighted.
2. Press the UP or DOWN button,
as necessary, to highlight the desired
display language.
3. When the desired display language is
highlighted, press the ENTER/LD
button to save your changes and return
to the MENU.