Equus 3110 - CanOBD2 Diagnostic Tool - Manual (Page 10)

About the Code Reader
ADJUSTMENTS AND SETTINGS
8 CAN OBD2
E
3. Press the DOWN button to increase the brightness of the LCD
display (make the display lighter).
4. When the desired brightness is obtained, press the ENTER/FF
button to save your changes and return to the MENU.
Selecting the Display Language
1. Use the UP and DOWN but-
tons, as necessary, to highlight Select
Language in the MENU, then press the
ENTER/FF
button.
■ The Select Language screen dis-
plays.
■ The currently selected display
Language is highlighted.
2. Press the UP or DOWN button,
as necessary, to highlight the desired
display language.
3. When the desired display language is
highlighted, press the ENTER/FF
button to save your changes and return
to the MENU.
Setting the Unit of Measure
1. Use the UP and DOWN but-
tons, as necessary, to highlight Unit of
Measure in the MENU, then press the
ENTER/FF
button.
2. Press the UP or DOWN button,
as necessary, to highlight the desired
Unit of Measure.
3. When the desired Unit of Measure
value is selected, press the ENTER/FF
button to save your changes.