Nissan/infiniti, 33 chapter 4 – Equus 3173 - Import Code Reader User Manual
Page 36
Nissan/Infiniti
ERASING CODES
33
Chapter 4
Nissan Erasing Procedures (Cont)
Infiniti Erasing Procedures
Model
Years Procedure
Stanza
86
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
87-89
After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
91-92
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
Van
87-90
After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
200SX
84-86
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
87-88
After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
90
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
240SX
89-90
After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
91-95
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
300ZX
86
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
87-89
After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
90-95
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
Model
Years Procedure
All
All
After you have finished retrieving codes turn the selector
back fully clockwise to erase the ECU code memory.