Equus 3173 - Import Code Reader - Manual (Page 31)

Nissan/Infiniti
CODE RETRIEVAL PROCEDURE
Chapter 4 28
Nissan Code Retrieval Procedures (Cont)
Tool
Model Years Eng. Req? Perform the following:
300ZX 86 3.0 Y the second digit (ones). Example: one
(cont) Red flash and two Green flashes = code
12 (N11).
300ZX 87-89 3.0 (incl. Y Procedure: Access ECU (from passen-
Turbo) ger side front kick panel) (N4). Turn ig-
nition on. Using Nissan tool, turn diag-
nostic mode selector fully clockwise and
observe LEDs on ECU. When LEDs
have blinked three times, turn selector
fully counterclockwise. Observe both
red and green LEDs on ECU for codes.
Codes: Codes are displayed by blinking
of both Red and Green LEDs (N10). The
Red LED blinks first, followed by the
Green LED. The Red LED indicates the
first digit (tens); the Green LED indi-
cates the second digit (ones). Example:
one Red flash and two Green flashes =
code 12 (N11).
Axxess 90 2.4 Y Procedure: Access ECU (located be-
hind center console) (N3). Turn ignition
on. Using Nissan tool, turn diagnostic
mode selector fully clockwise and ob-
serve LEDs on ECU. When LEDs have
blinked three times, turn selector fully
counterclockwise. Observe both red
and green LEDs on ECU for codes.
Codes: Codes are displayed by blinking
of both Red and Green LEDs (N10). The
Red LED blinks first, followed by the
Green LED. The Red LED indicates the
first digit (tens); the Green LED indi-
cates the second digit (ones). Example:
one Red flash and two Green flashes =
code 12 (N11).