Nissan/infiniti, Erasing codes – Equus 3173 - Import Code Reader User Manual
Page 35
Nissan/Infiniti
ERASING CODES
Chapter 4
32
ERASING CODES
•
Always observe safety precautions whenever working on a
vehicle.
•
Erase codes only when all repairs have been completed.
Refer to “Nissan Erasing Procedures” or “Infiniti Erasing
Procedures” for specific instructions for your year, make
and model.
•
After erasing codes, verify that repairs were successfully
completed. Start the engine and warm to normal
operating temperature. After normal operating
temperature is reached, turn off the ignition and repeat
the code retrieval procedure for your vehicle. If no codes
are retrieved, the repair(s) was successful.
Nissan Erasing Procedures
Model
Years Procedure
Altima
93-95
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
Axxess
90
After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
Maxima 87-92
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
93-94
After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
NX
91-93
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.
Path-
87-95
After codes have been retrieved turn selector fully clockwise.
finder
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
Hard-
87-95
After codes have been retrieved turn selector fully clockwise.
body
After the LED’s have blinked four times turn the selector
Pickup
fully counterclockwise. ECU code memory is now erased.
Pulsar
88-90
After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
Sentra
88-90
After codes have been retrieved turn selector fully clockwise.
After the LED’s have blinked four times turn the selector
fully counterclockwise. ECU code memory is now erased.
91-95
After codes have been retrieved turn selector fully clockwise
and wait for two seconds. ECU code memory is now erased.