EOTech CNVD-T2 Clip-On Night Vision Device - Thermal 2 - Manual (Page 59)

3-7
3.3 CORRECTIVE MAINTENANCE (Continued)
2. Grasp the middle of one lens cover strap and pull it free
from the objective lens cover.
3. Repeat step 2 for the other lens cover strap.
4. With fingers, pull lens cover straps free from the eyelets
on the objective collar.
5. Moisten and thread replacement lens cover straps
through the eyelets on the objective collar and pull
through using fingers.
NOTE
Step 6 is performed with the flat side of the
objective lens cover facing out, away from the
objective lens.
6. Moisten and thread opposite end of the lens cover straps
through the eyelets on the objective lens cover and pull
through using fingers.
7. Flip the objective lens cover down and over the objective
lens.