EOTech CNVD-T2 Clip-On Night Vision Device - Thermal 2 - Manual (Page 21)

1-11
1.9 FEATURES AND CONTROLS (Continued)
Table 1-3. List of Features and Controls (Continued).
Key
Control/
Indicator
Function
4 Objective Focus
Ring Used to focus the CNVD-T2 for the
viewing distance being observed.
5 Objective Lens
Cover Used to protect the objective lens and
internal imaging components from
possible damage.
6 Throw-Lever
Mounting Bracket Secures the CNVD-T2 to a weapon
equipped with a MIL-STD-1913 rail.
7 Laser Button Used to activate the IR Laser Pointer.
8 Eyepiece Allows the thermal image, as well as the
system menus and symbology, to be
viewed by the operator.
9 Objective Lens Collects thermal energy from the viewed
scene and focuses it upon a thermal
imaging detector.
10 Video Jack / Jack
Plug Provides a cable interface for viewing
CNVD-T2 thermal imagery on an external
monitor or to transfer captured thermal
images to a PC.
11 IR Laser Pointer Provides a means of marking potential
targets in low light or complete darkness
for handoff to individuals using night
vision devices.
12 Battery Cap /
Compartment Provides secure housing for the two 3V
lithium batteries that power the CNVD-T2.