EOTech CNVD-T2 Clip-On Night Vision Device - Thermal 2 - Manual (Page 27)

2-5
2.3 MOUNTING PROCEDURES (Continued)
5. Push the lever lock in to engage the locking mechanism.
Mounting In-Line with Other Optics
When the CNVD-T2 is mounted in-line with another optical
sight, the interface hood may be used to improve light
security and image quality.
1. Mount the day optic to the weapon rail per manufacturer’s
operating instructions.
2. Pull the circular end of the interface hood over the
eyepiece assembly of the CNVD-T2.
3. Mount the CNVD-T2 to the weapon rail (in front of the
optical sight). Ensure the interface hood covers the
objective lens of the optic (see Figure 2-3).
Figure 2-3. CNVD-T2 Mounted with ACOG®.