EOTech ATPIAL (AN/PEQ-15) - ADVANCED TARGET POINTER ILLUMINATOR AIMING LIGHT - Manual (Page 7)

v
WARNING
• Do not short circuit, puncture, disassemble,
crush, or incinerate battery.
• Do not attempt to recharge battery.
• Prior to use, inspect battery for cracks, dents,
leakage, or bulging. Never install a defective
battery in the ATPIAL.
WARNING
Lithium batteries can explode or cause burns if
disassembled, shorted, recharged, or exposed to
water, fire, or high temperatures (above 100°C or
212°F). Do not place loose batteries in a pocket
or other container containing metal objects. Do
not store batteries with hazardous or combustible
materials. Store in a cool, dry, ventilated area.
WARNING
Use of incorrect batteries poses a risk of fire or
explosion. Be aware that batteries do exist with
similar physical characteristics to the DL123A
battery, but with a different voltage and/or polarity
path. Ensure that only 3V lithium batteries with a
raised positive (+) terminal are installed in the
ATPIAL.
WARNING
Use of off-brand batteries poses a risk of fire or
explosion. Ensure that only 3V lithium batteries
produced by a well-known battery manufacturer
are installed in the ATPIAL. These batteries are
specifically designed for use in high performance,
high-drain devices, and contain built-in fault and
heat protection features.