EOTech ATPIAL (AN/PEQ-15) - ADVANCED TARGET POINTER ILLUMINATOR AIMING LIGHT - Manual (Page 25)

2-3
2.3 MOUNTING PROCEDURES
Rail Grabber Bracket
The ATPIAL is equipped with an integral rail grabber bracket
(Figure 2-2) that is designed for direct attachment to
weapons with a MIL-STD-1913 rail.
Figure 2-2. Rail Grabber Bracket.
Mounting Configurations
The ATPIAL can be mounted on either the top or side rails of
the host weapon.
Mounting Instructions
WARNING
Failure to properly secure the ATPIAL to the rail
may lead to boresight repeatability and zeroing
issues. In extreme cases, the ATPIAL could fall
off the rail, thereby exposing the operator or other
personnel to the ATPIAL laser(s).
MOUNTING
SCREW
RECOIL LUG