EOTech ATPIAL (AN/PEQ-15) - ADVANCED TARGET POINTER ILLUMINATOR AIMING LIGHT - Manual (Page 41)

2-19
2.9 MODE ACTIVATION
NOTE
The ATPIAL is equipped with a shut-down feature
that will automatically turn off any laser that has
been activated for five continuous minutes. To
reactivate, press (single tap) the FIRE Button.
Once the mode of operation has been selected, the ATPIAL
may be used in that mode by activating the system as
follows:
Momentary Operation
Pressing and holding the FIRE Button operates the ATPIAL
in the selected mode. The selected laser(s) will remain on
until the FIRE Button is released, or after five minutes of
continuous operation, whichever comes first.
Continuous Operation
Pressing the FIRE Button twice in rapid succession (double-
tap) operates the ATPIAL in the selected mode. The
selected laser(s) will remain on until the FIRE Button is
pressed a third time (single tap), or after five minutes of
continuous operation, whichever comes first.
Remote Cable Switch
When installed, the Remote Cable Switch may be used to
provide the same functionality as the FIRE Button and is
operated in the same manner. The Remote Cable Switch
plugs into the remote jack as shown in Figure 2-12. It is then
secured to the weapon to best suit the operator’s firing
preference using the retaining straps and / or hook and loop
fastener tape.