EOTech ATPIAL (AN/PEQ-15) - ADVANCED TARGET POINTER ILLUMINATOR AIMING LIGHT - Manual (Page 59)

3-9
3.3 CORRECTIVE MAINTENANCE (Continued)
Figure 3-5. Positioning the Lens Cap.
4. Stretch the eyes of the lens cap lanyard over the
attachment points.
5. Flip the lens cap over the IR Aim Lasers.
Replacing Safety Screw
1. Remove safety screw by using a 3/32 inch hex head
wrench. Turn counterclockwise.
2. Install replacement safety screw in the lockout or storage
location. Using a 3/32 inch hex head wrench, turn
clockwise to tighten.
GLOSSY IR AIM LASER