Clinton Electronics CE-PTZ-KEY - Manual (Page 6)

6
Installation
Safety Instructions before starting
- Do not install and operate this appliance in a flammable and explosive environment.
- Make sure that the installation is done according to the local electricity safety regulations of
your country.
- Before installation and maintenance, make sure that the appliance is disconnected from the
power source.
- Handle the device during installation carefully. Falls or extreme vibration may cause
irreparable damages or void the warranty.
- Do not install or operate the device near any high-voltage devices or high-voltage cable.
The safety distance should remain at least 50m.
- To achieve best image quality, its recommended to use underground cable shielded with
steel tube. Do not install the cable without any protection.
- In a thunderstorm area or region with high inductive voltage, such as high voltage
transformer stations, it is necessary to use additional lightning-proof equipment or
lightning rod for protection.
- For outdoor installation, lightning-proof and grounding of the device should be considered.
Please refer to the industrial safety regulations of your country.
- Grounding should be considered to eliminate any interference and fulfill the safety
requirements. Do not connect the ground with short-circuited or other high voltage electric
networks.
- Make sure that the installation environment meets the requirements of the device, such as
weight support, sufficient room for cords, and power supply requirements.