Ashland I-155-TS2 - Manual (Page 28)

MODEL I-155 TS
Nitrogen over Hydraulic Accumlator
KEY NO. PART NO. DESCRIPTION
1. A155H67 Hose, 3/4” x 16” MORB with sweep
2. A125009 Bracket, Welded with bolts
3. A125005 Accumulator Cylinder
This Accumulator is rated at 4,000 psi
and is pre-charged at the plant at 2,800
psi. Any circuit pressure above 2,800
will bleed off into this accumulator until
it reaches 2.11 gallons of hydraulic oil
displacement. This accumulator can be
recharged with nitrogen however the ac-
cumulator is NOT REBUILDABLE.