American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 78)

78
PoE Power over Ethernet - Advanced
Select the Advanced menu to setup detailed control functions of PoE.
The port number and name are displayed for each port. The PoE Mode allows pairs A or B to be
selected for PoE power. The status indicates if the port is searching for a powered device or is
disabled or in normal operation.
The PoE Class radio buttons allow a specific power range to be forced into effect. If the powered
device tries to negotiate power outside of this range, the PoE port will go into protective fault
mode. Select none to allow the powered device to auto select the power range.
After making changes, select Save to make your settings permanent.