American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 109)

109
NETMASK=255.255.255.0
NETWORK=192.168.10.0
BROADCAST=192.168.10.255
GATEWAY=192.168.10.126
DOMAIN='americanfibertek.local'
DNS=192.168.10.126,192.168.10.122
DHCPSID=192.168.10.122
DHCPGIADDR=0.0.0.0
DHCPSIADDR=0.0.0.0
DHCPCHADDR=00:16:E2:FF:FF:F7
DHCPSHADDR=00:0C:41:F0:CC:FF
DHCPSNAME=''
LEASETIME=259200
RENEWALTIME=129600
REBINDTIME=226800
DHCP: New Address Email
Commander can be operated in DHCP applications that require dynamic IP addressing. This
includes Commander connected to the Internet via a cable modem or DSL which require client
access via these services. For these applications, Commander provides a method to inform
operators of new IP address using programming contained in its Global Settings. When the
DHCP assigns a new IP address, Commander will send out a notification similar to the example
to the left to the programmed IP Address. Global Settings can only be programmed by the Master
Admin.