American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 72)

72
Probe Setup P-VFP
The power probe (model P-VFP) measures: Voltage, Frequency and Power.
Setting Warning and Alarm Levels:
Levels within the Lower and Upper range are
normal. Levels outside this range will result in
an alarm as programmed by the operator.
Default Settings:
Default settings are set at the factory and may
have to be changed depending on the equipment
operation and location.
Settings for Log, Alert, Email, Aux Action and Durations are the same as for the P-TA and P-
TAH probes.