American Fibertek Net I/O N-664 - Manual (Page 21)

21
Pilot interface
The N-664 is intended to communicate over the network with up to four Pilot server
devices. The user will provide an address and port number for each of the Pilot servers
he wishes the N-664 to communicate with. The N-664 will automatically attempt to
connect to Pilot servers when a valid IP address and port number have been provided.
Once connected to a Pilot server, the N-664 will send updates of the status of all alarm
inputs and aux outputs to each Pilot server every 5 seconds. It will also send immediate
updates every time an alarm input or aux output changes state.