American Fibertek N-TAH - Manual (Page 37)

37
Setting Default Value Range
Normal 31 characters
Warning 31 characters
Alarm 31 characters
Repeat Off Off
On
Repeat Interval 15 0-9999 seconds
Each measured environmental data value can have a text message associated with
each of its normal, warning, and alarm states. If a valid TCP address and port number
are provided in the “TCP Message IP” field at the top of the screen, the message
associated with each of the normal, warning, and alarm states will be sent to that
address and port whenever the environmental data value changes state between
normal, warning, and alarm.
If the ‘Repeat’ checkbox is selected, the N-TAH will send the message associated with
the current state of the environmental data value to the entered IP address periodically.
The Repeat Interval setting is used to set how frequently this message will be sent.