Brewer LiftMate - Manual (Page 7)

7 Document # 2102196 RevA
Getting the Most from the LiftMate Battery
NOTE: The LiftMate has protective circuitry to prevent the
charge from draining to excessively low levels. Keeping
the battery charged will ensure optimal service, while
extending battery life to its fullest.
1. When the charge in the LiftMate battery drops to a
preset level the “
LOW BATTERY”
indicator light on the hand
pendant will flash and the unit will beep when the any
button is pushed. Plug LiftMate into a wall receptacle
as soon as possible to recharge the battery.
2. When the charge in the LiftMate battery drops to a level
that will cause battery life to shorten if use continues,
all functions will stop. The unit will beep, and a steady
indicator light on the hand pendant will appear if any
hand pendant button is pushed. Plug LiftMate into wall
receptacle to enable functions and recharge battery.
3. Always use a replacement battery from Brewer. Never
use any other battery which could cause damage to
the unit or improper operation.
4. When not using the LiftMate, always keep the unit
plugged into a wall receptacle to keep the battery
charged. Leaving the unit unplugged for an extended
period of time (i.e. several months) will allow the bat-
tery to discharge, causing premature battery failure.
INSTALLATION (Continued)
LiftMate Battery Disposal
CAUTION
● Do not disassemble the LiftMate battery.
● Please dispose of the LiftMate battery according to
your local regulations for lead-acid storage batteries.