GE 45613 GE Z-Wave 3-Way Dimmer Kit with flying leads - Manual (Page 21)

Restoring Factory Defaults
All Configuration Parameters can all be restored to their factory
default settings by using your master controller to reset the device.
Interoperability with Z-Wave
™ Devices
A Z-Wave ™ network can integrate devices of various classes, and
these devices can be made by different manufacturers. Although
every Z-Wave certified product is designed to work with all other
Z-Wave certified products, your controller must include the
appropriate device classifications in order to control non-lighting
Z-wave devices. As an example, the GE 45600 basic remote is
designed only for controlling Z-Wave devices using the lighting
control classification. The GE 45601 deluxe remote with LCD readout
can control other Z-Wave certified devices like thermostats as well
as lighting.
WARRANTY
JASCO Products warrants this product to be free from
manufacturing defects for a period of two years from the original
date of consumer purchase. This warranty is limited to the repair
or replacement of this product only and does not extend to
consequential or incidental damage to other products that may be
used with this product. This warranty is in lieu of all other warranties,
expressed or implied. Some states do not allow limitations on how
long an implied warranty lasts or permit the exclusion or limitation
of incidental or consequential damage, so the above limitations may
not apply to you. This warranty gives you specific rights, and you
may also have other rights which vary from state to state. Please
contact Customer Service at 800-654-8483 (option 4) between
7:30AM – 5:00PM CST or via our website (www.jascoproducts.com) if
the unit should prove defective within the warranty period or
visit easyzwave.com
JASCO Products Company
Building B
10 E Memorial Rd. Oklahoma City, OK 73114