GE 19215 GE Direct Wire Push Button White User Manual
Direct wire push button, Replaces current chime push button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
§mmmmm
Direct Wire Push Button
Replaces current chime push button
Note: This button is not recommended for use on
systems which exceed 16 volts.
Installation
Push buttons ore typically mounted at the some
height above the door sill os the door knob or handle
between 36" and
W
above the sill. Locate the two
door chime wires emanating from the existing door
chime circuit. Test
the door chime by
touching the two
wires together,
completing the
circuit. If door chime
does not sound,
check transformer
or chime. Turn off
power. Attach one
wire to each of the
screw terminals on
the bock of the
button. Mount
button in desired
location with two
screws provided.
Install according to
applicable local
electrical codes.
screw
—
terminals
From
Wall