beautypg.com

Disassembling the lcd module – Acer 420 User Manual

Page 82

background image

74

Chapter 3

Disassembling the LCD Module

1.

Remove the four screwpad then unscrew the four screws on the LCD bezel.

2.

Detach the LCD bezel from the lower side of the LCD module carefully..

3.

Unscrew the screw that holds the LCD inverter.

4.

Disconnect the inverter board.

5.

Remove the inverter wire.

6.

Unscrew the four screws that fasten the LCD to LCD panel. Two on each side.

7.

Remove the LCD from the LCD panel.

8.

Remove the four (two on each side) screws holding the two LCD brackets then take the brackets away.

9.

Tear off the mylar that fastens the LCD coaxial cable.

10. Disconnect the LCD coaxial cable.

.

TM420.book Page 74 Monday, September 23, 2002 10:27 AM

See also other documents in the category Acer Notebooks: