Acer Altos R720 Series - Manual (Page 103)

93
4 Gently pull the RAID cache upward to remove it from the slot (B).
5 Close the clips.
6 Replace the air baffles and CPU air duct.
7 Observe the post-installation instructions described on page 36.
To install the RAID cache:
1 Observe the ESD precautions and pre-installation instructions
described on page 35.
2 Remove the air baffles. See “To remove the small air baffle”
section on page 45.
3 Locate the RAID cache memory (DDR-2) slot on the SAS mid-plane
board.
4 Open the clips on the slot.
5 Align then insert the RAID cache into the slot (A).
6 Press the holding clips inward to lock the RAID cache in place (B).
Note: Both the RAID activation key and the RAID cache is required
to activate the hardware RAID. For instructions on installing the
RAID activation key, see page 92.
7 Observe the post-installation instructions described on page 36.