GE PT925DNBB - Manual (Page 13)

13
DO NOT LIFT THE DOOR BY THE HANDLE!
Place hands on both sides of
the door, and close the oven
door to the removal position,
which is most of the way closed.
Lift door up and
out until the
hinge arms
clear the slots.
Hinge
Unlocked
Position
Hinge
Slot
Hinge
Arm
Hinge
Unlocked
Position
Hinge
Slot
Hinge
Arm
Hinge Clears Slot
Appendix
Lower Oven Door Removal and
Installation Instructions
1
2
3
4
Bottom door removal is not recommended
for installation of the product.
Open the oven door as far as it will go.
Pull both hinge locks
down toward the door
frame, to the unlocked
position. This may
require a fl at blade
screwdriver.
Lift oven door by placing
one hand on each side.
The door is heavy; you
may need help. Do not
lift the door by the handle.
With door at the same angle as removal
position, (most of the way closed), seat the
notch of the hinge arm into the bottom
edge of the hinge slot. The notch of the
hinge arm must be fully seated into the
bottom of the slot.
Open the oven door as far as it will open.
Close the oven door.
Push the hinge locks up against the front
frame of the oven cavity, to the locked
position.
NOTE: The oven door is heavy. You may
need help lifting the door high enough to
slide it into the hinge slots. Do not lift the
door by the handle.
1
2
3
5
4
Bottom Edge
of Slot
Notch of Hinge
Securely Fitted
into Bottom of
Hinge Slot
Hinge in Locked Position
Hinge Arm
Hinge Notch
DOOR REMOVAL DOOR REPLACMENT