beautypg.com

Esu 120e, Product specifications, Ordering information – ADTRAN ESU 120e User Manual

Page 2: E1/fe1 multiplexer, Network interface, Dte interface(s), Electrical and mechanical, G.703 drop interface, Management options and interfaces, Testing and troubleshooting

background image

ADTRAN, Inc.

Corporate Headquaters

Attention:

International Department

901 Explorer Boulevard

Huntsville, Alabama 35806

USA

www.adtran.com

Asia Pacific—Beijing, China

+86 10 8857-6415 voice

+86 10 8857-6417 fax

[email protected]

Asia Pacific—Hong Kong, China

+852 2824-8283 voice

+852 2824-8928 fax

[email protected]

Asia Pacific—Guangzhou, China

+86 20 8384-6015 voice

+86 20 8384-7127 fax

[email protected]

Asia Pacific—Melbourne,

Australia

+61 3-9658-0500 voice

+61 3-9658-0599 fax

[email protected]

European/Middle East/Africa—

Bad Homburg, Germany
+49 6172-483-2304 voice

Germany

+1 256-963-8695 voice

Alabama, USA

+49 6172-483-2305 fax

Germany

[email protected]

Latin America/Caribbean

+1 954-474-4424 voice

Florida, USA

+1 256-963-7551 voice

Alabama, USA

+1 954-474-1298 fax

Florida, USA

[email protected]

Mexico

+1 954-474-4424 voice

Florida, USA

+1 256-963-7551 voice

Alabama, USA

+1 954-474-1298 fax

Florida, USA

[email protected]

U.S. Headquarters

Huntsville, Alabama USA

+1 256-963-8000 voice
+1 256-963-8669 voice

+1 256-963-6300 fax

[email protected]

ADTRAN is a

TL 9000 registered company.

ADTRAN is a

ISO 9001 registered company.

I-61200420L1-8C July 2003

Copyright © 2003 ADTRAN, Inc.

All rights reserved.

Specifications subject to change without notice. ADTRAN, ESU 120e, T-Watch PRO, and
ADVISION are trademarks of ADTRAN, Inc. and/or its affiliates in the U.S. and certain other
countries. All registered trademarks and trademarks mentioned in this publication are the
property of their respective owners.

Product Specifications

Network Interface

Line Rate

E1/FE1 (2.048 Mbps)

Electrical

G.703

Physical Interface

75–ohm BNC and 120–ohm DB15

Framing

G.704

Line Code

HDB3

Input Signal

0 to –30 dB

DTE Interface(s)

Data Rate

Nx56 or Nx64 kbps (N=1 to 30)

Electrical and Mechanical

Electrical

V.35, V.36, X.21/V.11 or EIA–530

Physical Interface

DB25 connector

TS0 Assignment

User Selectable

G.703 Drop Interface

Line Rate

E1/FE1 (2.048 Mbps)

Electrical

G.703

Physical Interface

120 ohm balanced – DB15

Framing

G.704

Line Code

HDB3

Management Options and Interfaces

Control In / Control Out Ports

Interface: EIA–232, PC serial port, modem or SLIP

connection to external router

Physical Connector: RJ–45, modular 8–pin

10BaseT Interface

Interface: IEEE 802.3 compliant, 10 Mbps

Physical Connector: RJ-45, modular 8-pin

Service: SNMP, Telnet, ICMP, ARP, PING,

T-Watch PRO

, ADVISION

ESU 120e

E1/FE1 Multiplexer

Testing and Troubleshooting

Loopbacks

NI line, NI payload, Add/Drop line, Add/Drop port

and DTE bi-directional loopback

Test pattern generator and detector

QRSS and 511 (selectable TSOs)

All 0s and all 1s (transmit only)

Performance Monitoring

Performance statistics based on G.821

Reports: NI information stored for last 24 hours

(15–minute increments)

Agency Approval

UL 1950, IEC 950, CISPR 22,

FCC Part 15 (Class A), and CE Mark

Environment

Operating Temperature

0 to 50°C, (32 to 122°F)

Storage Temperature

–20 to 60°C, (–4 to 140°F)

Physical

Dimensions

7.94 cm (3.125") H, 31.75 cm (12.5") D, 21.6 cm (8.5") W

Weight

4 lb

Power

90–250 VAC, 50/60 Hz

Product Includes

One 8-pin to 8-pin modular cable

Modular to female DB-25 adapter

User Manual

Ordering Information

Equipment

Part #

ESU 120e

1200420L1

ESU 120e HDSL

1200421L1

X.21/V.11 Adapter Cable

1200282L1

V.35 Adapter Cable

1200285L1

DB–15 to BNC Adapter

1200209L1