Specifying storage details, Adding a storage group, Modifying a server group – HP SAN User Manual
Page 17: 3 select storage window
HP StorageWorks SAN Designer user guide
17
1.
Select an added server group. You can select the server group in one of the following ways:
• From the Server Group drop down list
• From the server group table
2.
Click the Delete Server Group button to delete the server group.
After entering server details, click Next. This displays the Select Storage window.
Specifying storage details
Specify storage details in the Select Storage window.
shows the Select Storage window.
Figure 3
Select Storage window
The Select Storage window allows you to add, modify and delete a storage group.
Adding a storage group
Complete the following steps to add a storage group:
1.
Enter a convenient name (optional) of the storage group in the Storage Group box.
2.
Enter the number of storage devices in this group in the Count box. Enter a number between 1 and
100.
3.
Select the storage model from the Storage Model drop down list.
4.
If required, enter the number of HBA fabric connections for each server in the HBA Fabric Connections
for each Server box.
NOTE:
The HBA fabric connections for each array is disabled for EVA 4000, EVA 6000 and EVA
8000 disk arrays since the number of ports is always the same.
5.
Click the Add Storage Group button to add this group.
The storage group is listed in the storage group table.
Modifying a server group
Complete the following steps to modify a storage group: