Specifying server details, Adding a server group, Modifying a server group – HP SAN User Manual
Page 16: Deleting a server group, 2 select server window
16
Using HP StorageWorks SAN Designer
Specifying server details
The Select Server window displays details of servers in the SAN.
displays the Select Server
Window.
Figure 2
Select Server window
The Select Server window allows you to add, modify and delete a server group.
Adding a server group
Complete the following steps to add a server group:
1.
Enter a convenient name (optional) for the server group in the Server Group box.
2.
Enter the number of servers in this group in the Count box. Enter a number between 1 and 100.
3.
Select the operating system from the Server OS drop down list.
4.
Select the operating system version from the OS Version drop down list.
5.
Enter the number of HBA fabric connections for each server in the server group in the HBA Fabric
Connections for each Server box.
6.
Click the Add Server Group button to add this group.
The server group is listed in the Server group table.
Modifying a server group
Complete the following steps to modify a server group:
1.
Select an added server group. You can select the server group in one of the following ways:
• From the Server Group drop down list
• From the server group table
2.
Modify details of the server group.
3.
Click the Add Server Group button to save changes.
Deleting a server group
Complete the following steps to delete a server group: