HP LaserJet 4000 Printer series - Manual (Page 90)

EN
Chapter 4: Problem Solving 79
70':2'%6'&
2#2'45+<'
The paper size you are trying to print is not the same as the settings
for the tray.
Make sure that all trays are correctly adjusted for size. (The printer
will continue trying to print the job until size settings are correct.)
If you are trying to print from Tray 1, make sure the printer’s control
panel setting for paper size is correctly configured.
If you are trying to print from the optional 500-sheet tray, be sure to
set the paper size dial to match the paper size loaded in the tray.
After performing the actions above, press [Go] . The page containing
the error will automatically be reprinted. (Or, you might want to press
[Cancel Job] to clear the job from the printer’s memory.)
Z
24+06'4'4414
alternates with
24'55)161
%106+07'
A temporary printing error occurred.
Press [Go] . The page containing the error will automatically be
reprinted.
If this message persists, contact an HP-authorized service or support
provider. (See the HP Support pages at the front of this user’s guide.)
Z(75'4'4414
An internal error has occurred. Turn the printer off, and then turn the
printer on.
The message might clear, and then reappear when the next print job
is sent. If this message persists, contact an HP-authorized service or
support provider. (See the HP Support pages at the front of this user’s
guide.)
ZQTZ
24+06'4'4414
A temporary printing error occurred.
Press [Go] . The page containing the error will automatically be
reprinted.
If this message persists, contact an HP-authorized service or support
provider. (See the HP Support pages at the front of this user’s guide.)
Printer Messages (Continued)
Message Explanation or Recommended Action