HP Deskjet 5850 Color Inkjet Printer - Manual (Page 80)

resetting the printer's network name
As part of troubleshooting the printer, you may need to reset the printer's network
name (SSID) setting to one of the following:
●
hpsetup
●
an unspecified network name
resetting the network name to hpsetup
Follow these steps to reset the printer's network name to hpsetup:
1. Verify that the printer is powered on and is idle.
2. Press and hold down the Network button.
3. While holding down the Network button, press and release the Resume button.
4. Release the Network button.
5. Print a network configuration page (for instructions, click here ).
6. Verify that the network name (item 12 on the list) is set to hpsetup.
If the network name is not hpsetup, then repeat steps 1 through 6 .
resetting the network name to an unspecified SSID
Resetting the printer's network name setting to an unspecified SSID allows the
printer to connect to a wireless network that broadcasts its network name and
presents the strongest signal to the printer.
To reset the printer's network name setting to an unspecified SSID, reset the printer
to its factory defaults (for instructions, click
here ).