HP Deskjet 5850 Color Inkjet Printer - Manual (Page 38)

If one of these network settings in the printer is incorrect, you will not be able to
communicate with the printer:
●
communication mode
●
Network Name (SSID)
●
Channel (Ad hoc networks only)
●
authentication type
●
Encryption
●
WPA (TKIP)
Follow these steps to correct the printer's network settings:
1. Connect the printer to your network or computer with an Ethernet cable.
2. Open the printer's embedded Web server (EWS) .
3. Click the Networking tab, then click Network Settings under the Configuration
heading.
4. Change the printer's settings to match the settings of the network, then click
Finish .
Click the Advanced Configuration button to access advanced
authentication and WPA (TKIP) settings.
5. Close the printer's EWS, then disconnect the Ethernet cable from the printer.