HP LaserJet Pro 300 Color MFP M375 - Manual (Page 204)

Set the alarm volume, phone-line volume, and ring volume
1. From the Home screen, touch the Setup button.
2. Touch the System Setup menu.
3. Touch the Volume Settings menu.
4. Touch the name of the volume setting that you want to adjust, and then touch one of the options.
Repeat this step for each volume setting.
Set stamp-received faxes
The product prints the sender identification information at the top of each received fax. You can also
stamp the incoming fax with your own header information to confirm the date and time that the fax
was received. The factory-set default for stamp-received faxes is
Off .
NOTE: Turning on the stamp-received setting might increase the page size and cause the product
to print a second page.
NOTE: This option applies only to received faxes that the product prints.
1. From the Home screen, touch the Setup button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Scroll to and touch the Stamp Faxes button, and then touch the On button.
Set the private receive feature
When the private-receive feature is active, received faxes are stored in memory. A password is
required to print the stored faxes.
NOTE: When the product fax memory is full, the product cannot receive more fax jobs. If the private
receive setting is enabled, make sure that the received faxes are checked and printed or deleted on a
regular basis in order to avoid filling the fax memory.
1. From the Home screen, touch the Setup button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
188 Chapter 12 Fax ENWW