HP LaserJet Pro 300 Color MFP M375 - Manual (Page 105)

Manage print cartridges
Correctly using, storing, and monitoring the print cartridge can help ensure high-quality print output.
Change settings for print cartridges
Print when a print cartridge is at estimated end of life
Supply-related notifications are communicated on the product control panel.
● A Low message—where is the color cartridge—appears when a print
cartridge is nearing the estimated end of its useful life.
● A Very Low message appears when the print cartridge is at its estimated end of
useful life. To ensure optimal print quality, HP recommends replacing a print cartridge when the
Very Low message appears.
Print-quality problems can occur when using a cartridge that is at its estimated end of life. The supply
does not need to be replaced at this point in time unless the print quality is no longer acceptable.
NOTE: Using the Continue setting allows printing beyond Very Low without customer interaction
and can result in unsatisfactory print quality.
When a color print cartridge becomes very low, the product prints in black only to prevent fax
interruptions. To configure the product to print in color and use the remaining toner in the print
cartridge past very low, follow these steps:
1. From the Home screen on the control panel, touch the Setup button.
2. Open the following menus:
● System Setup
● Supply Settings
● Color Cartridges
● Very Low Setting
● Continue
When you choose to replace the very low print cartridge, color printing resumes automatically.
ENWW Manage print cartridges 89