HP TouchSmart 9100 All-in-One-PC - Manual (Page 19)

Welcome 13
Computer Stand
The HP TouchSmart 9100 Business PC is shipped with the computer stand collapsed against the back of
the computer. To assure that the computer is in a stable position on your desktop, pull the computer stand
open until it snaps into place. Then, if you want to change the angle of the HP TouchSmart 9100, hold
each side of the computer, and tilt it (the monitor moves forward; the stand stays in place) to an angle of
between 5 degrees and 40 degrees from the vertical.
Computer Swivel
The computer allows a usable range of motion with the swivel feature.
CAUTION: Make sure the angle of the computer is at least 5 degrees from the vertical;
otherwise the computer will be unstable and could fall over.
CAUTION: The computer stand stays in place as you increase the angle; the computer moves
forward. Take care that the computer screen does not move off the table.
40°
max
5° min.