Alpine MDA-W890 - Manual (Page 78)

78
English
MD Operation
Normal Play and Pause
1
2
1
1
Open the movable display and insert an MD.
The movable display automatically closes and
the playback starts.
When an MD is already inserted, press the
SOURCE button to set the mode to MD. The
mode will change each time the button is
pressed.
Note: Insert the MD in the direction the arrow
indicates with the label facing up.
(* Only with the CD shuttle connected.)
Press the O/C button to stop the MD playback.
The movable display opens and the MD ejects.
Notes:
•
Make sure the MD is fully inserted into the
mechanism before pressing the O/C button
to close the movable display.
• Remove any dust or debris before inserting.
• Do not use MDs labels peeling or covering
the shutter.
• Do not use MD with over sealed label or half
way peeled off label.
• Do not insert the MD while the power is
OFF. Inserting forcibly could severely
damage the mechanism.
O/C
2
O/C
OPEN/CLOSE
SOURCE
TUNER CD CHANGER MD
*
3D