Alpine MDA-W890 - Manual (Page 104)

104
English Equalizer
Operation
1
2
3
Memorizing the
Equalizer Settings
Press the EQ button to select the desired
equalizer setting (factory preset or your own)
you wish to store in memory.
Within 5 seconds after operating step 1 , press
and hold any one of the Preset buttons ( 1 –
M 6
) for at least 2 seconds. The indicators blink
for 5 seconds showing the unit is ready for
storing.
While the indicators are blinking, press the
Preset button (
1 –
M
6
) into which you wish to
store the selected equalization setting. Repeat
Steps
1 to 3 to store other settings.
The example shows the setting has been stored
at the Preset 2.
Note: You can store the D.H.E. and Surround
settings as well as the Equalizer settings
in the Presets.
2.#
1
EQ
USER
P.SET
USER
P.SET
3
2
1
M
H
CT
6
5
4
3
2
1
M
H
CT
6
5
4