HP Integrated Lights-Out 4 - Manual (Page 19)

MOD_FEDERATION_GROUP parameters
GROUP_NAME—The name of the group to be changed, or the new name to be given to the
specified Federation group, depending on the parameters’ location. The name must be from 1 to
31 characters long.
GROUP_KEY—The new password to set for the group. The password must be 1 to 31 characters
long.
ADMIN_PRIV—Administer User Accounts—Enables members of a group to add, edit, and delete
iLO user accounts.
REMOTE_CONS_PRIV—Remote Console Access—Enables members of a group to remotely access
the host system Remote Console, including video, keyboard, and mouse control.
RESET_SERVER_PRIV—Virtual Power and Reset—Enables members of a group to power-cycle or
reset the local iLO system.
VIRTUAL_MEDIA_PRIV—Virtual Media—Enables members of a group to use scripted Virtual Media
with the local iLO system.
CONFIG_ILO_PRIV—Configure iLO Settings—Enables members of a group to configure most iLO
settings, including security settings, and to remotely update firmware.
LOGIN_PRIV—Login—Enables members of a group to log in to iLO.
MOD_FEDERATION_GROUP runtime errors
Some possible MOD_FEDERATION_GROUP error messages include:
•
The GROUP_NAME must not be left blank.
NOTE: This error only appears if the value in the
GROUP_NAME="groupname"> command is left blank. This error does not appear if
newgroupname in the parameter setting is
left blank or the line is omitted. In that case, the original group name is retained.
•
Group name not found.
•
The GROUP_NAME is too long.
•
The GROUP_KEY must not be left blank.
•
The GROUP_KEY is too long.
•
Group membership already exists.
•
User does not have correct privilege for action. CONFIG_ILO_PRIV
required.
DELETE_FEDERATION_GROUP
Use DELETE_FEDERATION_GROUP to remove the iLO from a Federation group membership. The
command must appear within a RIB_INFO command block, and RIB_INFO MODE must be set to
write.
For example:
DELETE_FEDERATION_GROUP 19