HP Integrated Lights-Out 4 - Manual (Page 17)

GET_FEDERATION_GROUP parameters
GROUP_NAME—The name of the group to be displayed. The name must be from 1 to 31 characters
long.
GET_FEDERATION_GROUP runtime errors
GET_FEDERATION_GROUP returns the following message if the value specified for GROUP_NAME
does not match any existing groups:
Group name not found.
GET_FEDERATION_GROUP return messages
The following response is typical of the data returned from the GET_FEDERATION_GROUP
command:
STATUS="0x0000"
MESSAGE='No error'
/>
ADD_FEDERATION_GROUP
Use ADD_FEDERATION_GROUP to add a new Federation group membership and associated
privileges. The command must appear within a RIB_INFO command block, and RIB_INFO MODE
must be set to write.
For example:
GROUP_NAME="groupname"
GROUP_KEY="groupkey">
NOTE: HP iLO 4 supports a maximum of 10 Federation groups. To remove a Federation group,
use DELETE_FEDERATION_GROUP .
ADD_FEDERATION_GROUP 17