HP Integrated Lights-Out 4 - Manual (Page 11)

Figure 2 OA Enclosure Settings page
3. Select the Enable Enclosure iLO Federation Support check box, and then click Apply.
TIP: You can also use the CLI to enable or disable Enclosure iLO Federation Support. To enable
the setting, enter ENABLE ENCLOSURE_ILO_FEDERATION_SUPPORT. To disable the setting,
enter DISABLE ENCLOSURE_ILO_FEDERATION_SUPPORT. For more information about using
the OA CLI, see the HP BladeSystem Onboard Administrator Command Line Interface User Guide
at the following website:
http://www.hp.com/go/oa .
Verifying server iLO Federation capability
Use the following procedure to verify that a blade server is configured for iLO Federation support.
1.
Log in to the OA web interface (https://).
2. Navigate to the Device Bays
→→iLO page, as shown in
Figure 3 (page 12) .
Configuring enclosure support for iLO Federation 11