HP ProLiant BL25p G2 Server-Blade - Manual (Page 36)

Cabling 36
3. Connect a USB mouse to one USB connector.
4. Connect a USB keyboard to the second USB connector.
Item Description
1 Monitor
2 USB
mouse
3 USB keyboard
4 Local I/O cable
Accessing local media devices
Use the following configuration when configuring a server blade or loading software updates and
patches from a CD-ROM, such as the SmartStart CD, or a diskette.
CAUTION: Disconnect the local I/O cable when not in use. The port and connector do not provide a
permanent connection. Rear iLO 2 connector performance degrades when the local I/O cable is connected,
even if the iLO 2 connector on the cable is not in use.
1. Connect the local I/O cable to the server blade.
2. Connect the video connector to a monitor.
3. Connect a USB hub to one USB connector.
4. Connect the following to the USB hub:
• USB CD-ROM drive
• USB keyboard
• USB mouse