HP ProLiant BL25p G2 Server-Blade - Manual (Page 22)

Hardware options installation 22
Hardware options installation
In this section
Processor option..................................................................................................................................... 22
Hard drive option................................................................................................................................... 27
Memory option ...................................................................................................................................... 28
Fibre Channel mezzanine option ............................................................................................................. 29
NIC mezzanine option............................................................................................................................ 30
Battery-Backed Write Cache Enabler option .............................................................................................. 31
Processor option
Observe the following processor installation guidelines:
• Processor socket 1 must be populated at all times or the server does not function properly.
• When upgrading processor speed, always update the system ROM before installing the processor.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To avoid damage to the processor and system board, only authorized personnel should attempt
to replace or install the processor in this server blade.
CAUTION: To help avoid damage to the processor and system board, do not install the processor without
using the processor installation tool.
CAUTION: To prevent possible server blade malfunction and damage to the equipment, multiprocessor
configurations must contain processors with the same part number.
To install a processor:
1. Power down the server blade (on page 13 ).
2. Remove the server blade (on page 14 ).
3. Remove the access panel (on page 14 ).