HP Officejet Pro 8000 - A809 User Manual
Page 79
Media is not picked up from a tray
•
Make sure media is loaded in the tray. For more information, see
. Fan
the media before loading.
•
Make sure the media guides are snug, but not tight, against the stack.
•
Make sure media in the tray is not curled. Uncurl paper by bending it in the
opposite direction of the curl.
•
When using thin, special media, make sure that the tray is completely loaded. If
you are using special media that is only available in small quantities, try placing the
special media on top of other paper of the same size to help fill the tray. (Some
media is picked up more easily if the tray is full.)
•
If you are using thick, special media (such as brochure paper), load media so that
the tray is between 1/4 and 3/4 full. If necessary, place the media on top
of other paper of the same size so that the stack height is within this range.
•
Make sure Tray 2 (optional) is inserted properly.
•
If you are printing on the blank side of a page that has been used, the device may
have problems picking up the media.
Media is not coming out correctly
•
Make sure the output tray extension is extended; otherwise, printed pages may fall
off the device.
•
Remove excess media from the output tray. There is a limit to the number of
sheets the tray can hold.
Pages are skewing
•
Make sure the media loaded in the trays fits snugly between the media guides. If
the tray is removable, pull out the tray from the device, and reload the media
properly, making sure that the media guides are properly aligned.
•
Make sure the duplexer is properly installed.
•
Load media into the device only when it is not printing.
•
When reinserting a removeable tray into the device, do so gently. Forceful
insertion with a full stack of paper may cause sheets to slide up within the device,
causing the device to jam or pick multiple sheets at one time.
Multiple pages are being picked up
•
Fan the media before loading.
•
Make sure the paper guides are set to the correct markings in the tray for the
media size you are loading. Also make sure the guides are snug, but not tight,
against the stack.
Solve paper-feed problems
75