HP Color LaserJet CP3520 Printer Series - Manual (Page 66)

Depending on your HP Jetdirect print server model and operating version, the following are some tasks
that you can perform from the Networking screens:
● Change network configuration settings for various types of network connections
● Turn on or turn off printing protocols
● Set up a support contact and support URLs
● Set a password to control access to the product and network configuration settings. This password
is synchronized with the password that you set on the General Security screen under the
Settings tab, so you may set or reset it from either screen.
● Configure the security of your product through the use of passwords, access lists, and management
protocols
● View general network status information, including network statistics that are stored on the print
server, for network troubleshooting or optimization
● View protocol information for all supported network connections
● Open the HP Jetdirect Configuration page
● Set the frequency at which the HP EWS checks the network status
For more information about the Networking screens, see the following sources:
● Help. On each Networking screen, a ? in the upper-right corner of the screen provides a
description of the networking features. Also, from the Help screen you can gain access to additional
help from the HP Web site.
● HP Jetdirect Administrator's Guide. This guide is normally available on the software CD that
came with your product and can be downloaded from the hp.com support pages for your product
available on the following Web sites.
56 Chapter 4 Managing network operation from the Networking screens ENWW