HP StoreVirtual 4000 Storage - Manual (Page 16)

• HP StorageWorks Storage System Recovery DVD
• End User License Agreement
• Certificate of Authenticity Card
• Slide rail assembly
• HP ProLiant Essentials Integrated Lights-Out 2 Advanced Pack
Locate the serial number, Certificate of Authenticity, and End
User License Agreement
For technical support purposes, locate the storage system's serial number, Certificate of Authenticity
(COA), and End User License Agreement (EULA). Record the serial number and COA product key
and make a print copy of the EULA as needed.
The storage system's serial number is located in several places:
• Top of the storage system
• Back of the storage system
• Inside the storage system shipping box
• Outside of the storage system shipping box
The storage system's Certificate of Authenticity (COA) card is located inside the storage system shipping
box. There is also a COA sticker with product key affixed to the top of the storage system.
The storage system's printed End User License Agreement (EULA) is located in the media kit that is
shipped with the storage system. There is also an electronic copy of the EULA installed with the storage
system at %SystemDrive%\Windows\System32\license.rtf.
Install the storage system hardware
1. Install the rail kit by following the HP Rack Rail Kit installation instructions.
2. If connecting to the storage system using the direct attach method, connect the following cables
to the back panel of the storage system in the following sequence: keyboard, mouse, network
cable, monitor cable, and power cable.
NOTE:
• The keyboard, mouse, and monitor are not provided with the storage system.
3. If connecting to the storage system using the remote management method, connect a network
cable to a data port, a network cable to the iLO 2 port, and power cable.
Connect to the storage system
Use either the direct connect or remote management method to connect to the storage system.
Installing and configuring the server 16