HP Netserver L Server series - Manual (Page 23)

17
2 HP Navigator
Contents of the HP NetServer Navigator CD-ROM
Before the HP Navigator Main Menu is displayed, you may be prompted to set
the language and the time and date. You can also set the language that the BIOS
displays.
The Main Menu of HP Navigator directs you to modules where you can perform
configuration tasks. The menu buttons for these modules are as follows:
•
Readme File
•
Configuration Assistant and Installation Assistant
•
HP Management Solutions
•
NetServer Utilities
•
User Preferences
Another CD-ROM entitled HP NetServer Online Documentation gives you
access to relevant system documentation. See the chapter of this guide entitled
"Information Assistant."
The following is a description of the contents of HP Navigator, as accessed from
the Main Menu.
Readme File
This file includes the most recent information that was not available at the time
that the installation documentation was printed. It is important to check this file
before proceeding with the installation.
Configuration Assistant and Installation Assistant
HP Configuration Assistant guides you through the steps necessary to configure
the HP NetServer. Three methods of configuration are available: Express,
Custom, and Replicate.
Before you run Configuration Assistant and Installation Assistant, run the
SCSISelect utility and the Setup utility, if necessary: